Manufacturer reference; confirm the delivered hardware revision.
XM430-W350-T
ROBOTIS
ROBOTIS · Seoul
Headquarters contact address
37, Magok Jungang 5-ro 1-gil, Gangseo-gu, Seoul 07594, Korea
Check these before requesting a quote
- Application
- Integrated position-controlled actuator for compact research mechanisms, arms and humanoid prototypes.
- Interfaces & integration
- DYNAMIXEL Protocol 2.0 over TTL half-duplex. Match the physical bus, connector, supply and controller; R and T are not wired interchangeably.
- MOQ
- To be confirmed
- Project-specific price
- To be confirmed — configuration, quantity, tax and freight required
- Lead time
- To be confirmed
- Specification source checked
- 2026-11-07
Published stall torque is not continuous-duty torque. XM current-control capabilities must not be applied to XL430. Confirm horn, frames, cable, USB interface, thermal limits and control mode.
Manufacturer manuals & specification references
Ask the manufacturer for a configuration-specific quotation. Listing does not confirm availability.
Development & integration
RobotBay curation & document review · 2026-11-08
Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.
Review scope & evidence
- Review record
- RB-DOC-XM430-W350-T
- Model reviewed
- XM430-W350-T
- Reviewer & date
- RobotBay · documentation desk · 2026-11-08
- What was checked
- Model manual control table and bus variant; SDK repository; ROS 2 package prerequisites only.
- Not checked
- No hardware connection, build, simulation run, performance or purchase recommendation. Firmware/host combinations not listed below remain unconfirmed.
Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.
Communication & protocol
Official documentation · summary checkedTTL half-duplex; DYNAMIXEL Protocol 2.0.
Model e-Manual and control tableCommands you can send
Official documentation · summary checkedPosition, velocity, PWM and current targets; mode-dependent.
Model e-Manual and control tableFeedback you can read
Official documentation · summary checkedPosition, velocity, current, voltage and temperature.
Model e-Manual and control tableDeveloper access & restrictions
Official documentation · summary checkedPublic SDK; adapter and external power required. Additional commercial permissions unconfirmed.
Official DYNAMIXEL SDKOfficial ROS 2 hardware interfaceROS / ROS 2 & versions
Official documentation · summary checkedROS 2 interface README lists Humble, Jazzy and Rolling. Per-model joint configuration remains unconfirmed.
Official ROS 2 hardware interfaceSimulation / URDF / models
UnconfirmedUnconfirmed. Model- and version-specific documentation is still needed.
Assembly documentation
UnconfirmedUnconfirmed. Model- and version-specific documentation is still needed.
Calibration documentation
UnconfirmedUnconfirmed. Model- and version-specific documentation is still needed.
Official resources & applicable versions
XM430-W350-T; operating modes and feedback
online e-Manual; shipped firmware not confirmed · Checked 2026-11-08 · Official link; original terms applyProtocol SDK repository
repository README; Protocol 1.0/2.0 · Checked 2026-11-08 · Official link; original terms applyPackage-level distribution and adapter requirements, not a tested robot configuration
README: Humble / Jazzy / Rolling · Checked 2026-11-08 · Official link; original terms applyIntegration & hardware evidence
Community integration report: no reviewed report with an environment, steps and run evidence yet.
RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.
Versions & specifications
Displayed configuration: XM430-W350-T. Not applicable to every version.
Configuration notes and limitations · 1
- Published stall torque is not continuous-duty torque. XM current-control capabilities must not be applied to XL430. Confirm horn, frames, cable, USB interface, thermal limits and control mode.
Reference price record
To be confirmed
Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.
DYNAMIXEL X-series official family reference image. R uses RS-485; T uses TTL. Confirm the model label and connector.
Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.
View official image source ↗References
XM430-W350-T ↗Source stage label: Manufacturer public reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.
How to check a specification with RobotBay’s Spec-Claim Check
