← Back to atlas
Joint actuators

XM430-W350-R

ROBOTIS

DYNAMIXEL X-series official family reference image. R uses RS-485; T uses TTL. Confirm the model label and connector.
MANUFACTURER & ADDRESS

ROBOTIS · Seoul

Headquarters contact address

37, Magok Jungang 5-ro 1-gil, Gangseo-gu, Seoul 07594, Korea

View on supply chain map →Official address source ↗Address source checked 2026-11-07
SELECTION & RFQ

Check these before requesting a quote

Application
Integrated position-controlled actuator for compact research mechanisms, arms and humanoid prototypes.
Interfaces & integration
DYNAMIXEL Protocol 2.0 over RS-485. Match the physical bus, connector, supply and controller; R and T are not wired interchangeably.
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-07

Published stall torque is not continuous-duty torque. XM current-control capabilities must not be applied to XL430. Confirm horn, frames, cable, USB interface, thermal limits and control mode.

Manufacturer manuals & specification references

View manufacturer product / sales page

Ask the manufacturer for a configuration-specific quotation. Listing does not confirm availability.

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · 2026-11-08

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Review scope & evidence
Review record
RB-DOC-XM430-W350-R
Model reviewed
XM430-W350-R
Reviewer & date
RobotBay · documentation desk · 2026-11-08
What was checked
Model manual control table and bus variant; SDK repository; ROS 2 package prerequisites only.
Not checked
No hardware connection, build, simulation run, performance or purchase recommendation. Firmware/host combinations not listed below remain unconfirmed.
Model e-Manual and control tableOfficial DYNAMIXEL SDKOfficial ROS 2 hardware interface

Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.

ROS / ROS 2 & versions

Official documentation · summary checked

ROS 2 interface README lists Humble, Jazzy and Rolling. Per-model joint configuration remains unconfirmed.

Official ROS 2 hardware interface

Simulation / URDF / models

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Assembly documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Calibration documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Official resources & applicable versions

Model e-Manual and control table

XM430-W350-R; operating modes and feedback

online e-Manual; shipped firmware not confirmed · Checked 2026-11-08 · Official link; original terms apply
Official DYNAMIXEL SDK

Protocol SDK repository

repository README; Protocol 1.0/2.0 · Checked 2026-11-08 · Official link; original terms apply
Official ROS 2 hardware interface

Package-level distribution and adapter requirements, not a tested robot configuration

README: Humble / Jazzy / Rolling · Checked 2026-11-08 · Official link; original terms apply

Integration & hardware evidence

Community integration report: no reviewed report with an environment, steps and run evidence yet.

RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-07Source record date Not specified

Versions & specifications

Displayed configuration: XM430-W350-R. Not applicable to every version.

Manufacturer specifications · 7
Stall torque
4.1 N·m at 12 V / 2.3 A ↗
No-load speed
46 rpm at 12 V ↗
Supply voltage
10–14.8 V; recommended 12 V ↗
Reduction ratio
353.5:1 ↗
Mass
82 g ↗
Interface
RS-485 ↗
Position resolution
4096 pulse/rev ↗
Configuration notes and limitations · 1
  • Published stall torque is not continuous-duty torque. XM current-control capabilities must not be applied to XL430. Confirm horn, frames, cable, USB interface, thermal limits and control mode.

Reference price record

To be confirmed

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

DYNAMIXEL X-series official family reference image. R uses RS-485; T uses TTL. Confirm the model label and connector.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

XM430-W350-R ↗

Source stage label: Manufacturer public reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check