← Back to atlas
Motor drives

S1

ODrive

Manufacturer reference image; included accessories and delivered revision must be confirmed.
MANUFACTURER & ADDRESS

ODrive ·

Postal address not confirmed from an official source

To be confirmed

View on supply chain map →Official address source ↗Address source checked 2026-11-07
SELECTION & RFQ

Check these before requesting a quote

Application
Single-axis brushless motor control for prototypes and mechanisms. Match motor, encoder and braking design before energizing.
Interfaces & integration
CAN / USB; feedback and host modes depend on firmware. Review wiring and regenerative-energy handling.
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-07

Not a brushed-DC HAT and not a prevalidated pairing with listed motors. Current capability depends on cooling, voltage and firmware; official postal address remains unconfirmed.

Manufacturer manuals & specification references

View manufacturer product / sales page

Ask the manufacturer for a configuration-specific quotation. Listing does not confirm availability.

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · 2026-11-08

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Review scope & evidence
Review record
RB-DOC-ODrive-S1
Model reviewed
ODrive S1
Reviewer & date
RobotBay · documentation desk · 2026-11-08
What was checked
S1 named hardware, setup guide and CAN message definitions for documentation 0.6.12; no firmware execution or ROS build.
Not checked
No hardware connection, build, simulation run, performance or purchase recommendation. Firmware/host combinations not listed below remain unconfirmed.
S1 hardware datasheetOfficial CAN setup guideCANSimple protocolOfficial setup / wiring guide

Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.

Communication & protocol

Official documentation · summary checked

CANSimple, not an unspecified generic CAN control interface; USB setup is documented.

Official CAN setup guide

Commands you can send

Official documentation · summary checked

Set_Controller_Mode, Set_Input_Pos, Set_Input_Vel and Set_Input_Torque are documented.

CANSimple protocol

Feedback you can read

Official documentation · summary checked

Encoder position/velocity estimates, current, temperature, bus voltage/current and errors.

CANSimple protocol

Developer access & restrictions

Official documentation · summary checked

Public interface documentation; firmware-source availability and extra license rights unconfirmed.

Official CAN setup guide

ROS / ROS 2 & versions

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Simulation / URDF / models

Official documentation · summary checked

Hardware page links S1 CAD. A validated URDF or dynamics simulator is unconfirmed.

S1 hardware datasheet

Assembly documentation

Official documentation · summary checked

S1 wiring/power/encoder prerequisites are documented. Application-specific harness remains unconfirmed.

Official setup / wiring guide

Calibration documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Official resources & applicable versions

S1 hardware datasheet

S1 pinout and CAD link

documentation 0.6.12 · Checked 2026-11-08 · Official link; original terms apply
Official CAN setup guide

Guide explicitly includes S1

documentation 0.6.12 · Checked 2026-11-08 · Official link; original terms apply
CANSimple protocol

Command and feedback message table

documentation 0.6.12 · Checked 2026-11-08 · Official link; original terms apply

Integration & hardware evidence

Community integration report: no reviewed report with an environment, steps and run evidence yet.

RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-07Source record date Not specified

Versions & specifications

Displayed configuration: S1. Not applicable to every version.

Manufacturer specifications · 5
Supported motors
Single-axis BLDC / PMSM FOC ↗
DC bus voltage
16–48 V typical; 12 V minimum; 50.5 V maximum ↗
Continuous current
20 A free air; 40 A with heat spreader, 25°C ↗
Peak current
40–80 A depending on bus voltage / firmware ↗
Interfaces
CAN, USB; confirm firmware-specific host / feedback modes ↗
Configuration notes and limitations · 1
  • Not a brushed-DC HAT and not a prevalidated pairing with listed motors. Current capability depends on cooling, voltage and firmware; official postal address remains unconfirmed.

Reference price record

To be confirmed

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

Manufacturer reference image; included accessories and delivered revision must be confirmed.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

S1 ↗

Source stage label: Manufacturer public reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check