← Back to atlas
Inertial sensors

VN-100 Rugged

VectorNav

Manufacturer reference image; included accessories and delivered revision must be confirmed.
MANUFACTURER & ADDRESS

VectorNav · Dallas

Official published postal address

10501 Markison Road, Dallas, TX 75238, USA

View on supply chain map →Official address source ↗Address source checked 2026-11-07
SELECTION & RFQ

Check these before requesting a quote

Procurement notes curated by RobotBay2026-11-08 · VN-100 Rugged

Reviewed the cited official model page and only the fields stated here.

Configuration
Rugged: 36 × 33 × 9 mm, 15 g, 10-pin Harwin Official source ↗
Power
4.5–5.5 V input; 40 mA at 5 V; 220 mW listed Official source ↗
Rate
IMU up to 800 Hz; attitude up to 400 Hz Official source ↗
Protocol
VectorNav ASCII/binary; NMEA 0183; sync input/output Official source ↗
Interfaces & integration
Rugged serial TTL/RS-232. SPI is listed for SMD, not Rugged. Official source ↗

Include in your RFQ

  • Confirm physical variant, cable, logic levels and pinout.
  • Specify output groups, rates and calibration conditions.
  • Confirm manual/SDK license and firmware/software versions.

Inertial/attitude output; exact commands and feedback frames require the matching manual.

ROS 2: Exact ROS 2 distribution, driver release and firmware combination not verified.

No hardware test, transaction, firmware execution or full SDK/ROS compatibility test. Linked documents are not treated as read unless explicitly stated.

MOQ, a binding quote and lead time remain unconfirmed. These notes do not establish hardware testing or full manual/SDK compatibility.

Compare related models →
Application
Attitude sensing for mobile platforms and stabilized equipment; evaluate magnetic and vibration conditions.
Interfaces & integration
Serial TTL / RS-232; 10-pin Harwin
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-07

Rugged and SMD have different supply, interfaces, mass and packaging. AHRS heading depends on magnetic conditions; this is not a GNSS/INS.

Manufacturer manuals & specification references

View manufacturer product / sales page

Ask the manufacturer for a configuration-specific quotation. Listing does not confirm availability.

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · Not completed

Developer resources pending

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Developer documentation has not yet been curated or checked

The existing product record is retained. Manuals, SDK/API, communication, control, feedback, access, ROS versions, simulation, assembly and calibration remain unconfirmed. No review badge is awarded.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-07Source record date Not specified

Versions & specifications

Displayed configuration: VN-100 Rugged. Not applicable to every version.

Manufacturer specifications · 7
Accelerometer range
±16 g ↗
Gyroscope range
±2000°/s ↗
Output rate
IMU up to 800 Hz; attitude up to 400 Hz ↗
Dimensions
36 × 33 × 9 mm ↗
Mass
15 g ↗
Supply voltage
4.5–5.5 V ↗
Interface
Serial TTL / RS-232; 10-pin Harwin ↗
Configuration notes and limitations · 1
  • Rugged and SMD have different supply, interfaces, mass and packaging. AHRS heading depends on magnetic conditions; this is not a GNSS/INS.

Reference price record

To be confirmed

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

Manufacturer reference image; included accessories and delivered revision must be confirmed.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

VN-100 Rugged ↗

Source stage label: Manufacturer public reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check