← Back to atlas
Battery management

UPS Module 3S

Waveshare

Official reference image shows cells; batteries are not included.
MANUFACTURER & ADDRESS

Waveshare · Shenzhen

Published company contact address

2F, World Trade Plaza south side, Fuhong Road, Futian District, Shenzhen 518039, China

View on supply chain map →Official address source ↗Address source checked 2026-11-06
SELECTION & RFQ

Check these before requesting a quote

Procurement notes curated by RobotBay2026-11-08 · UPS Module 3S

Read the official 2,989-byte ZIP's INA219.py without executing it. Hardware store/Wiki returned HTTP 403.

Monitoring
INA219 reads bus voltage, current and power; I2C bus 1 Official source ↗
Bus address
Main uses INA219(addr=0x41); class default is 0x40 Official source ↗
State estimation
Battery percentage = (bus_voltage − 9) / 3.6 × 100 Official source ↗
Interfaces & integration
Official example evidences I2C monitoring; pinout, hardware ratings and protection not rechecked. Official source ↗Official source ↗Official source ↗

Include in your RFQ

  • Confirm chemistry, cells, protection, charger and cables.
  • Verify output while charging, thermal limits and low-battery shutdown.
  • Match board revision/I2C address and run a real load test.

Voltage/current/power reads; charge-control commands and protection behavior unconfirmed.

ROS 2: Exact ROS 2 distribution, driver release and firmware combination not verified.

No hardware test, transaction, firmware execution or full SDK/ROS compatibility test. Linked documents are not treated as read unless explicitly stated.

MOQ, a binding quote and lead time remain unconfirmed. These notes do not establish hardware testing or full manual/SDK compatibility.

Compare related models →
Application
Prototype backup supply for small onboard computers and low-power mobile electronics.
Interfaces & integration
I2C voltage / current monitoring; 3.3 V or 5 V I2C logic selection. Separate pack-voltage and regulated 5 V / 3.3 V outputs.
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-07

A 3S prototype UPS / protection board, not a high-current traction BMS or a complete battery pack. Cells are excluded. Confirm cell length, matching, charging adapter and thermal load; 5 V / 5 A is the regulated output rating, not a motor-pack rating.

View manufacturer product / sales page

Official product / sales page. Confirm exact variant, regional availability and the complete offer with the manufacturer.

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · Not completed

Developer resources pending

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Developer documentation has not yet been curated or checked

The existing product record is retained. Manuals, SDK/API, communication, control, feedback, access, ROS versions, simulation, assembly and calibration remain unconfirmed. No review badge is awarded.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-07Source record date Not specified

Versions & specifications

Displayed configuration: UPS Module 3S. Not applicable to every version.

Manufacturer specifications · 5
Battery support
3 × 18650 Li-ion cells in series; cells not included ↗
Output voltage
Pack voltage; 5 V / 5 A; 3.3 V / 300 mA ↗
Host interface
I2C monitoring ↗
Charger
12.6 V / 2 A; plug / bundle to confirm ↗
Dimensions
60 × 93 mm ↗
Configuration notes and limitations · 1
  • A 3S prototype UPS / protection board, not a high-current traction BMS or a complete battery pack. Cells are excluded. Confirm cell length, matching, charging adapter and thermal load; 5 V / 5 A is the regulated output rating, not a motor-pack rating.

Reference price record

To be confirmed

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

Official reference image shows cells; batteries are not included.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

UPS Module 3S ↗

Source stage label: Manufacturer-published reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check