← Back to atlas
LiDAR / ranging

RPLIDAR A1 · 12 m reference

SLAMTEC

Official top-view dimension drawing; confirm hardware revision before ordering.
MANUFACTURER & ADDRESS

SLAMTEC · Shanghai

Published contact office; official page lists another Shanghai office. Production location and visit entrance unconfirmed.

Room 601, 6F, Kailong Technology Building, Building 3, No. 6, Lane 3158, Longdong Avenue, Pudong New District, Shanghai, China

View on supply chain map →Official address source ↗Address source checked 2026-11-07
SELECTION & RFQ

Check these before requesting a quote

Application
Indoor planar ranging and mobile-robot navigation prototyping.
Interfaces & integration
3.3 V UART output; 5 V sensor supply. Confirm motor-speed control and USB adapter / cable inclusion.
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-07

A1 is a 2D scanner, not MID-360 3D LiDAR or a safety-rated scanner. Confirm the complete A1 hardware suffix and range conditions; the official table contains other-range accuracy rows, which are not used here to extend the 12 m claim.

View manufacturer product / sales page

Official product / sales page. Confirm exact variant, regional availability and the complete offer with the manufacturer.

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · 2026-11-08

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Review scope & evidence
Review record
RB-DOC-RPLIDAR-A1-·-12-m-reference
Model reviewed
RPLIDAR A1 · 12 m reference
Reviewer & date
RobotBay · documentation desk · 2026-11-08
What was checked
A1 support table, serial/scan API examples, license split and ROS 2 README reviewed; exact A1 subrevision not established.
Not checked
No hardware connection, build, simulation run, performance or purchase recommendation. Firmware/host combinations not listed below remain unconfirmed.
SLAMTEC SDK and usage guideOfficial ROS 2 driver

Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.

Communication & protocol

Official documentation · summary checked

Serial-port SDK connection; confirm adapter and baud rate for the actual A1 submodel.

SLAMTEC SDK and usage guide

Commands you can send

Official documentation · summary checked

startMotor / stopMotor and scan start/stop APIs.

SLAMTEC SDK and usage guide

Feedback you can read

Official documentation · summary checked

Scan angle, distance and quality; device information includes hardware/firmware version.

SLAMTEC SDK and usage guide

Developer access & restrictions

Official documentation · summary checked

Public source; SDK uses BSD-2-Clause, demos GPLv3.

SLAMTEC SDK and usage guide

ROS / ROS 2 & versions

Official documentation · summary checked

ROS 2 repository names A1 and links Humble/Foxy/Galactic/Rolling setup; exact subrevision build untested.

Official ROS 2 driver

Simulation / URDF / models

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Assembly documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Calibration documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Official resources & applicable versions

SLAMTEC SDK and usage guide

A1 support table and scan APIs

README; exact A1 subrevision unconfirmed · Checked 2026-11-08 · Official link; original terms apply
Official ROS 2 driver

A1 support and ROS distribution links

README · Checked 2026-11-08 · Official link; original terms apply

Integration & hardware evidence

Community integration report: no reviewed report with an environment, steps and run evidence yet.

RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-07Source record date Not specified

Versions & specifications

Displayed configuration: RPLIDAR A1 · 12 m reference. Not applicable to every version.

Manufacturer specifications · 7
Detection range
0.15–12 m (published A1 reference) ↗
Field of view
360° planar scan ↗
Sampling frequency
8000 samples / s ↗
Rotational speed
5.5 Hz reference ↗
Interface
UART, 3.3 V logic ↗
Supply voltage
5 V ↗
Operating temperature
0–40 °C ↗
Configuration notes and limitations · 1
  • A1 is a 2D scanner, not MID-360 3D LiDAR or a safety-rated scanner. Confirm the complete A1 hardware suffix and range conditions; the official table contains other-range accuracy rows, which are not used here to extend the 12 m claim.

Reference price record

To be confirmed

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

Official top-view dimension drawing; confirm hardware revision before ordering.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

RPLIDAR A1 · 12 m reference ↗

Source stage label: Manufacturer-published reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check