← Back to atlas
LiDAR / ranging

Pulsar ME450

Orbbec

Official model reference image; confirm delivered revision and included options.
MANUFACTURER & ADDRESS

Orbbec · Shenzhen

Asia office

Orbbec Technology Building, No. 88 High-tech North 1st Road, Nanshan District, Shenzhen, China

View on supply chain map →Official address source ↗Address source checked 2026-11-08
SELECTION & RFQ

Check these before requesting a quote

Application
AMR, forklift and outdoor mobile-device navigation, obstacle detection and 3D scanning. Validate blind spots and chosen scan pattern.
Interfaces & integration
100 Mbps Ethernet through M12 8-pin power/data connector; PTP/GPS/PPS time synchronization. Datasheet documents configurable scanning modes and point-cloud packets.
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-08

Datasheet V1.1 specifies ±30 mm accuracy; newer marketing mentions millimeter-level performance only under narrower target / indoor conditions. Do not replace the general datasheet value with that claim. Harness is an optional accessory.

Manufacturer manuals & specification references

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · Not completed

Developer resources pending

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Developer documentation has not yet been curated or checked

The existing product record is retained. Manuals, SDK/API, communication, control, feedback, access, ROS versions, simulation, assembly and calibration remain unconfirmed. No review badge is awarded.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-08Source record date Not specified

Versions & specifications

Displayed configuration: Pulsar ME450. Not applicable to every version.

Manufacturer specifications · 9
Measurement range
0.1–45 m @ 90%; 0.1–15 m @ 10% reflectivity ↗
Field of view
270° H × 60° V; configurable V 45° / 30° ↗
Ranging accuracy
±30 mm under datasheet laboratory conditions ↗
Measurement frequency
200 kHz (datasheet calculation basis: 360° horizontal FOV) ↗
Horizontal rotation frequency
10 / 15 / 20 Hz; default 20 Hz ↗
Data interface
100 Mbps Ethernet; M12 8-pin connector ↗
Power input
9–28 V DC; typical <6 W, maximum <8 W ↗
Ingress protection
IP67 ↗
Dimensions / weight
65 × 65 × 83 mm / approximately 270 g without cable ↗
Configuration notes and limitations · 2
  • Manufacturer-published specifications; verify the ordered hardware and firmware revision.
  • Datasheet V1.1 specifies ±30 mm accuracy; newer marketing mentions millimeter-level performance only under narrower target / indoor conditions. Do not replace the general datasheet value with that claim. Harness is an optional accessory.

Reference price record

Confirm with manufacturer

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

Official model reference image; confirm delivered revision and included options.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

Pulsar ME450 ↗

Source stage label: Manufacturer-published reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check