← Back to atlas
LiDAR / ranging

MID-360

Livox

Official MID-360 product illustration; do not substitute MID-360S / MID-360L specifications.
MANUFACTURER & ADDRESS

Livox · Shenzhen

Legal correspondence address in Hong Kong; Shenzhen directory pin is unverified

40th Floor, Sunlight Tower, 248 Queen's Road East, Wanchai, Hong Kong

View on supply chain map →Official address source ↗Address source checked 2026-11-07
SELECTION & RFQ

Check these before requesting a quote

Application
Mobile sensing / ranging; distinguish scanning LiDAR from single-point sensors and verify test conditions.
Interfaces & integration
100BASE-TX Ethernet
MOQ
To be confirmed
Project-specific price
To be confirmed — configuration, quantity, tax and freight required
Lead time
To be confirmed
Specification source checked
2026-11-07

0.1–0.2 m returns are reference only; range precision is not guaranteed there. Legacy Shenzhen coordinates have not been confirmed. Official Hong Kong address is legal correspondence, not a Shenzhen factory.

Manufacturer manuals & specification references

MID-360 user manual (PDF)

Manufacturer download-center manual; check power, sync wiring and low-temperature startup. Applies to MID-360, not S / L variants.

View manufacturer product / sales page

Official manufacturer product / contact page. Exact order configuration, availability, MOQ, project price and lead time require written confirmation.

DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · 2026-11-08

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Review scope & evidence
Review record
RB-DOC-MID-360
Model reviewed
MID-360
Reviewer & date
RobotBay · documentation desk · 2026-11-08
What was checked
MID-360 named in SDK and driver; network configuration, API declarations and distribution build instructions reviewed.
Not checked
No hardware connection, build, simulation run, performance or purchase recommendation. Firmware/host combinations not listed below remain unconfirmed.
Official Livox SDK2Livox LiDAR API headerOfficial ROS / ROS 2 driver

Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.

Communication & protocol

Official documentation · summary checked

Ethernet/IP; separate command, point-data and IMU ports in MID360 configuration.

Official ROS / ROS 2 driver

Commands you can send

Official documentation · summary checked

Device configuration and LiDAR work-mode APIs; no robot joint-control capability implied.

Livox LiDAR API header

Developer access & restrictions

Official documentation · summary checked

SDK2 and driver are public; installed firmware and redistribution terms still need project-specific review.

Official Livox SDK2

ROS / ROS 2 & versions

Official documentation · summary checked

README lists Melodic, Noetic, Foxy, Humble and Jazzy with different build targets.

Official ROS / ROS 2 driver

Simulation / URDF / models

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Assembly documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Calibration documentation

Unconfirmed

Unconfirmed. Model- and version-specific documentation is still needed.

Official resources & applicable versions

Official Livox SDK2

MID-360 supported device

master README · Checked 2026-11-08 · Official link; original terms apply
Livox LiDAR API header

Device configuration and callback declarations

master API header · Checked 2026-11-08 · Official link; original terms apply
Official ROS / ROS 2 driver

MID360 network configuration and supported OS/ROS

master README · Checked 2026-11-08 · Official link; original terms apply

Integration & hardware evidence

Community integration report: no reviewed report with an environment, steps and run evidence yet.

RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-07Source record date Not specified

Versions & specifications

Displayed configuration: MID-360. Not applicable to every version.

Manufacturer specifications · 14
Detection range
40 m @10% / 70 m @80% reflectivity, 100 klx ↗
Field of view
H360° / V−7° to 52° ↗
Point rate
200,000 points/s, first return ↗
Frame rate
10 Hz typical ↗
Supply voltage
9–27 V DC ↗
Average power
6.5 W ↗
Mass
265 g ↗
Dimensions
65×65×60 mm ↗
Ingress protection
IP67 ↗
Interface
100BASE-TX Ethernet ↗
Data synchronization
IEEE 1588-2008 PTPv2 / GPS ↗
Integrated IMU
ICM40609 ↗
Operating temperature
−20 to 55 °C; thermal conditions apply ↗
Cold-start peak power
Up to 14 W during low-temperature self-heating ↗
Configuration notes and limitations · 2
  • Manufacturer-published specifications; confirm configuration, duty cycle, thermal conditions, MOQ and lead time before purchase.
  • 0.1–0.2 m returns are reference only; range precision is not guaranteed there. Legacy Shenzhen coordinates have not been confirmed. Official Hong Kong address is legal correspondence, not a Shenzhen factory.

Reference price record

Confirm with manufacturer

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

IMAGE SOURCE

Official MID-360 product illustration; do not substitute MID-360S / MID-360L specifications.

Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.

View official image source ↗

References

MID-360 ↗

Source stage label: Manufacturer-published reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check