Official manufacturer document. Check the model and revision before ordering.
Franka Research 3
Franka Robotics
Franka Robotics · Munich
Legal imprint address; other official pages may show a different office
Koppstraße 12, 81379 Munich, Germany
Check these before requesting a quote
- Application
- Research manipulation and force-controlled interaction with direct joint-level control options.
- Interfaces & integration
- Ethernet / FCI up to 1 kHz on the supported control configuration. Confirm real-time host, libfranka, safety I/O and end-effector interface.
- MOQ
- To be confirmed
- Project-specific price
- To be confirmed — configuration, quantity, tax and freight required
- Lead time
- To be confirmed
- Specification source checked
- 2026-11-07
R02212 release 2.4: Arm v2.1 (309969) with Control v5.1 (295341). Seven axes and joint torque sensing do not imply the same task throughput as a six-axis cobot. Confirm FCI access, gripper, safety assessment, regional certification and delivered revision.
Manufacturer manuals & specification references
Official manufacturer document. Check the model and revision before ordering.
Ask the manufacturer for a configuration-specific quotation. Listing does not confirm availability.
Development & integration
RobotBay curation & document review · 2026-11-08
Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.
Review scope & evidence
- Review record
- RB-DOC-Franka-Research-3
- Model reviewed
- Franka Research 3
- Reviewer & date
- RobotBay · documentation desk · 2026-11-08
- What was checked
- FR3 identification, FCI modes/access, current ROS branch and model repository reviewed; no real-time control or simulation executed.
- Not checked
- No hardware connection, build, simulation run, performance or purchase recommendation. Firmware/host combinations not listed below remain unconfirmed.
Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.
Communication & protocol
Official documentation · summary checkedFCI over Ethernet with a suitable external workstation.
FCI command and feedback overviewSystem and network requirementsCommands you can send
Official documentation · summary checkedFCI documents joint torque/position/velocity and Cartesian pose/velocity commands.
FCI command and feedback overviewFeedback you can read
Official documentation · summary checkedJoint state, measured torque, estimated external forces and collision/contact state.
FCI command and feedback overviewDeveloper access & restrictions
Official documentation · summary checkedResearch-robot FCI must be enabled; installed system/libfranka pairing and purchased access rights must be confirmed.
FCI documentation and activation requirementsSystem and network requirementsROS / ROS 2 & versions
Official documentation · summary checkedCurrent franka_ros2 README targets Jazzy. Do not infer compatibility with an older Humble checkout.
Official ROS 2 integrationSimulation / URDF / models
Official documentation · summary checkedOfficial franka_description provides model variants; match the exact FR3 revision before simulation/assembly.
Official robot descriptionsAssembly documentation
UnconfirmedUnconfirmed. Model- and version-specific documentation is still needed.
Calibration documentation
UnconfirmedUnconfirmed. Model- and version-specific documentation is still needed.
Official resources & applicable versions
Explicitly identifies FR3 and FER as different robots
online FCI docs · Checked 2026-11-08 · Official link; original terms applyEthernet FCI modes and status, not an installed-system test
online FCI overview · Checked 2026-11-08 · Official link; original terms applyC++ control library
repository README · Checked 2026-11-08 · Official link; original terms applyCurrent Jazzy branch instructions
jazzy README · Checked 2026-11-08 · Official link; original terms applyFR3 geometry variants; not interchangeable with Panda
main README · Checked 2026-11-08 · Official link; original terms applyWorkstation and real-time/network prerequisites
online libfranka requirements · Checked 2026-11-08 · Official link; original terms applyModel/version identification and FCI activation section; this manual is not evidence of the installed system
R02216 / 1.1.1 / system image 5.8 · Checked 2026-11-08 · Public reading; redistribution requires permissionIntegration & hardware evidence
Community integration report: no reviewed report with an environment, steps and run evidence yet.
RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.
Versions & specifications
Displayed configuration: Franka Research 3. Not applicable to every version.
Configuration notes and limitations · 1
- R02212 release 2.4: Arm v2.1 (309969) with Control v5.1 (295341). Seven axes and joint torque sensing do not imply the same task throughput as a six-axis cobot. Confirm FCI access, gripper, safety assessment, regional certification and delivered revision.
Reference price record
To be confirmed
Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.
Official manufacturer reference image; confirm the delivered hardware and included accessories.
Image from the manufacturer’s website or official manual. Framing is standardized; the product is not redrawn. Appearance may vary by configuration.
View official image source ↗References
Franka Research 3 ↗Source stage label: Manufacturer public reference. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.
How to check a specification with RobotBay’s Spec-Claim Check
