← Back to atlas
Humanoid

G1 · G1 EDU

Unitree Robotics

Product image pending
DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · 2026-11-08

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Documentation review at a glance

Official manual

Checked within the scope below

Official manual V1.6; identity, revision and contents checked. Full operating instructions were not audited.

G1 official user manual

SDK & API

Checked within the scope below

C++ SDK2 and the named G1 low-level example inspected; installed firmware pairing unconfirmed.

Unitree SDK2 source repository

ROS 2

Checked within the scope below

Official README lists Ubuntu 20.04 / Foxy and Ubuntu 22.04 / Humble, with Humble recommended. Jazzy and newer distributions are unconfirmed here.

Official Unitree ROS 2 package

Control permissions

Checked within the scope below

EDU development capability is listed; exact purchased entitlement unconfirmed.

G1 / G1 EDU comparison
Review scope & evidence
Review record
RB-DOC-UNITREE-G1-EDU
Model reviewed
Unitree G1 EDU
Reviewer & date
RobotBay · documentation desk · 2026-11-08
What was checked
G1 EDU versus standard access; manual V1.6 cover/contents; G1 low-level source, ROS distribution table and model variants.
Not checked
Document and source-code inspection only. No SDK build, robot connection, simulation run, performance test or entitlement check against a purchased unit. Unlisted hardware/firmware combinations remain unconfirmed.
G1 official user manualUnitree SDK2 source repositoryOfficial Unitree ROS 2 packageG1 robot description filesG1 manual and tutorial indexG1 ankle control exampleG1 / G1 EDU comparison

Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.

Commands you can send

Official documentation · summary checked

The G1 example writes joint q, dq, feed-forward tau and kp/kd. It releases the existing motion service before taking low-level control. This is evidence of an API, not proof that every G1 SKU permits it.

G1 ankle control example

Feedback you can read

Official documentation · summary checked

The example reads joint position/velocity, motor status, temperature and IMU attitude/gyroscope data from LowState.

G1 ankle control example

Developer access & restrictions

Official documentation · summary checked

Unitree lists secondary development for G1 EDU and not for G1 standard. Confirm the EDU subconfiguration, joint count, motion-firmware version and enabled services on the quotation.

G1 / G1 EDU comparisonG1 ankle control example

ROS / ROS 2 & versions

Official documentation · summary checked

Official README lists Ubuntu 20.04 / Foxy and Ubuntu 22.04 / Humble, with Humble recommended. Jazzy and newer distributions are unconfirmed here.

Official Unitree ROS 2 package

Simulation / URDF / models

Official documentation · summary checked

Official files distinguish 23-DOF, 29-DOF and hand/revision variants. A model file is not a validated simulator or a match to an unspecified EDU configuration.

G1 robot description files

Assembly documentation

Unconfirmed

The official index includes an EDU waist-fastener guide and separate hand assembly guides. Applicability to the delivered hand/waist revision remains unconfirmed.

G1 manual and tutorial index

Calibration documentation

Unconfirmed

Official tutorials distinguish 23-DOF and 29-DOF calibration. Unit-specific offsets and a calibration result have not been obtained.

G1 manual and tutorial index

Official resources & applicable versions

G1 official user manual

Manual entry, model identity, cover revision and contents only; not a complete operating-procedure review.

V1.6 · Checked 2026-11-08 · Official link; original terms apply
Unitree SDK2 source repository

SDK build prerequisites; model-specific files are linked separately.

main; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
Official Unitree ROS 2 package

README distribution table and named examples; not a hardware compatibility test.

master; Foxy / Humble · Checked 2026-11-08 · Official link; original terms apply
G1 robot description files

Model-specific description directory; variants must match the purchased configuration.

master; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
G1 manual and tutorial index

Manufacturer index for manuals, network setup and calibration resources.

online index; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
G1 ankle control example

Source inspection of this named example only; code availability does not establish a device entitlement.

main; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
G1 / G1 EDU comparison

Secondary-development row distinguishes G1 EDU from G1 standard.

online comparison; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply

Integration & hardware evidence

Community integration report: no reviewed report with an environment, steps and run evidence yet.

RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-04Source record date 2026-10-04

Versions & specifications

Displayed configuration: G1 EDU. Not applicable to every version.

Specifications · 5
Height
1320 mm ↗
Mass
Approx. 35 or more ( including battery ) kg ↗
Payload
arm maximum Approx. 3 kg ↗
Runtime
Approx. 2 h ↗
Degrees of freedom / joint motor count
See original source text ↗
Configuration notes and limitations · 5
  • Source note available in original-language record.
  • Source note available in original-language record.
  • Source note available in original-language record.
  • Source note available in original-language record.
  • https://www.unitree.com/g1/

Reference price record

Not disclosed / unverified

Source release record:2024-05-13

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

Source image / video referencesImage 1 ↗

References

Source stage label: Unverified source record. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check