← Back to atlas
Humanoid

T1 · Basic

Booster Robotics

Product image pending
DEVELOPER RESOURCES

Development & integration

RobotBay curation & document review · 2026-11-08

Document review checks the correspondence between the cited material and our summary. It is not performance certification, hardware testing or a purchase recommendation. Manufacturer documentation, community runs and RobotBay tests are separate evidence.

Documentation review at a glance

Official manual

Checked within the scope below

Official T1 overview checked; full Basic service manual unconfirmed.

T1 product manual: overview
Review scope & evidence
Review record
RB-DOC-BOOSTER-T1-BASIC
Model reviewed
Booster T1 Basic (23-DOF scope)
Reviewer & date
RobotBay · documentation desk · 2026-11-08
What was checked
Official T1 overview, API header, low-level example, current firmware/runtime requirements, ROS interface definitions and 23/29-DOF model split.
Not checked
Document and source-code inspection only. No SDK build, robot connection, simulation run, performance test or entitlement check against a purchased unit. Unlisted hardware/firmware combinations remain unconfirmed.
T1 product manual: overviewBooster C++ SDKT1 API and model restrictionsLow-level control exampleOfficial ROS 2 message/service definitionsCurrent deployment prerequisitesBoosterOS Python SDK overviewOfficial T1 URDF / MuJoCo assets

Dates record an actual review, not a deployment. Online documents and default branches may change afterwards.

Commands you can send

Official documentation · summary checked

T1-labelled API header exposes mode changes, walking velocity and head control. The low-level example writes q, dq, tau, kp and kd after Prepare/Custom mode setup. Check method-level restrictions for the exact arm configuration.

T1 API and model restrictionsLow-level control example

Developer access & restrictions

Official documentation · summary checked

BoosterOS documentation requires Python >=3.10 and firmware >=1.7, and restricts runtime to Booster robots or Studio virtual robots. The current deploy guide requires firmware >=1.7.2. Basic-edition feature entitlements are not exhaustively specified.

BoosterOS Python SDK overviewCurrent deployment prerequisites

Simulation / URDF / models

Official documentation · summary checked

Official assets distinguish T1 23-DOF URDF/XML from the 29-DOF 7-axis-arm URDF. This record is scoped to 23 DOF; simulation was not run.

Official T1 URDF / MuJoCo assets

Calibration documentation

Unconfirmed

A Basic-edition joint-zeroing procedure and revision were not confirmed in the reviewed sources. Do not apply K1 camera hand-eye calibration instructions to T1.

T1 product manual: overview

Official resources & applicable versions

T1 product manual: overview

23-DOF platform and configuration-specific restrictions; overview, not a complete service manual.

online production docs; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
Booster C++ SDK

Build prerequisites and Python-package delivery note.

main; Ubuntu 22.04 · Checked 2026-11-08 · Official link; original terms apply
T1 API and model restrictions

Header explicitly names T1; method-level factory-configuration restrictions.

main; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
Low-level control example

Prepare/Custom modes and joint target fields; delivered-unit configuration unconfirmed.

main; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
Current deployment prerequisites

Production documentation: firmware >=1.7.2 and ROS 2 booster_interface.

production guide; read 2026-11-08 · Checked 2026-11-08 · Official link; original terms apply
BoosterOS Python SDK overview

boosteros runtime, Python and firmware requirements.

Python >=3.10; firmware >=1.7 · Checked 2026-11-08 · Official link; original terms apply

Integration & hardware evidence

Community integration report: no reviewed report with an environment, steps and run evidence yet.

RobotBay hardware test: not performed; these SDKs have not been built or run against hardware by RobotBay.

Help improve this product’s developer resources

Submissions are saved for review, without automatically earning integration or test badges. Original resources are linked; full-document or code hosting requires a separate rights review. RobotBay is independent, nonprofit and vendor-neutral; sponsorship does not influence review conclusions.

Public reference · independently untestedCaptured 2026-11-04Source record date 2026-10-05

Versions & specifications

Displayed configuration: Basic. Not applicable to every version.

Specifications · 4
Height
1180 mmSee original source text ↗
Mass
Approx. 30 kgSee original source text ↗
Runtime
walking Approx. 2 h / standing Approx. 4 hSee original source text ↗
Degrees of freedom
23 DOFSee original source text ↗
Configuration notes and limitations · 4
  • Source note available in original-language record.
  • Source note available in original-language record.
  • Source note available in original-language record.
  • https://www.booster.tech/robots/

Reference price record

Not disclosed / unverified

Not a live quote. Confirm configuration, currency, tax, shipping, stock and delivery with the manufacturer.

Source image / video referencesImage 1 ↗

References

Source stage label: Unverified source record. Not independently verified by RobotBay. Listing does not endorse performance or delivery capability.

How to check a specification with RobotBay’s Spec-Claim Check